Carbonit WS7 3 way tap

Carbonit WS7 three way faucet

• Wash- and filtered water separately available and still from the same tap.
• Separate valves and outlets for filtered- and wash water.
• Housing and discharge pipe made from chrome-plated brass.
• Ceramic seals, 360 degree tilting tap.
• With a connecting adaptor compatible as well as for whirler. (Check distance between the two water outlets to prevent interference between the whirler and the other discharge!)
• Compatible with all the under counter filters.

Installation

• Carbonit WS7 tap height: 32.5 cm (measured from the worktop).
• Discharge clearance height: 28.8 cm (measured from the worktop).
• Fits a maximum worktop thickness of 8 cm.
• Connecting hose length: 39 cm. As required, these can be extended.
• For further information and exact dimensions please refer to the tab Characteristics.

Scope of delivery

This Carbonit sink tap WS7 set contains the following parts

• one three-way sink tap with ceramic valves
• two perlators
• three flexible hoses (39 cm long) with 3/8" union nuts for hot, cold and filtered water
• one adapter 3/8" male thread for filtered water
• all parts needed for mounting

Dimensions and other information on the sink tap Carbonit WS 7

H x W x D:	325 x 161 x 235 mm
Material:	Brass
Surface:	shiny chrome
Suitable for low pressure boilers:	No
Length of the connection hoses:	390 mm
Connection:	3/8"ET, 3/8" Union nut
Outlet for the filterted water:	separate perlator
Height of the outlet:	288 mm
Distance outlet for filtered water - tap central axis:	170 mm
Distance outlet for normal water - tap central axis:	195 mm
Distance between outlets:	25 mm
Diameter of the bore in the countertop:	32 - 38 mm
Max. thickness of the countertop:	80 mm