Carbonit IFP Premium-20 SOE
Description
Basics
- The long version of the IFP Premium-9
- Twice the flow rate and retention capacity compared to the short variant.
- The high maximum flow rate allows a comfortable filtering of the entire cold water flow at the discharge point.
- The existing water tap may be left unchanged. No special- or additional tap required!
- High retention rates for heavy metals (e.g. lead and copper), pesticides, medical residues and chlorine.
- High protection against bacteria. (See characteristics)
- Vitally important minerals, like magnesium and calcium, are not removed from the water.
- The filter cartridge consists of an activated carbon mono-bloc (Monoblock®) material based on coconut shell.
- Filter mesh: 0.75 µm; flow rate: 14.6 l/min (at 4 bar).
- Filter capacity: ca. 19,000 litres of water.
Compatible water filters
The cartridge fits into the following filter unit:
Operation notes
- For hygienic reasons, we recommend replacement of the cartridges every 6 months (according to DIN 1988).
- Do not miss any cartridge replacement, apply for our non-binding and free of charge filter subscription service.
- Only to be used with cold water and must be protected against freezing.
Scope of delivery
- One Carbonit IFP Premium-20 SOE filter cartridge including gaskets.
Characteristics
Characteristics
| Diameter: | 70 mm |
| Length of the filter cartridge: | 508 mm (20") |
| Filter mesh (µm): | 0.75 |
| Adsorptive retention rate (Polar pesticides, medical residues, bacteria, ...): | 77% |
| Flow rate (l/min at 4 bar): | 14.6 |
| Adsorptive retention rate (Lead, Copper): | 70% |
| Adsorptive retention capacity: | 16.5 m³ |
| Adsorptive retention rate (Chlorine): | 83% |
| Particle retention capacity: | 22.5 m³ |
| Max. useful life of the filter cartridge: | 3 months |
| Contains: | Activated carbon |
