Carbonit IFP Special-20
Description
Basics
- The long version of the IFP Special-9
- Twice the flow rate and retention capacity compared to the short variant.
- The high maximum flow rate allows a comfortable filtering of the entire cold water flow at the discharge point.
- The existing water tap may be left unchanged. No special- or additional tap required!
- Very low retention rates for heavy metals (e.g. lead and copper), pesticides and medical residues.
- Low retention rate for chlorine. (See characteristics)
- Vitally important minerals, like magnesium and calcium, are not removed from the water.
- The filter cartridge consists of an activated carbon mono-bloc (Monoblock®) material based on coconut shell.
- Filter mesh: 34 µm; flow rate: 28 l/min (at 0.5 bar).
- Filter capacity: ca. 41,000 litres of water.
Compatible water filters
The cartridge fits into the following filter unit:
Operation notes
- For hygienic reasons, we recommend replacement of the cartridges every 6 months (according to DIN 1988).
- Do not miss any cartridge replacement, apply for our non-binding and free of charge filter subscription service.
- Only to be used with cold water and must be protected against freezing.
Scope of delivery
- One Carbonit IFP Special-20 filter cartridge including gaskets.
Characteristics
Characteristics
| Diameter: | 70 mm |
| Length of the filter cartridge: | 508 mm (20") |
| Filter mesh (µm): | 34 |
| Adsorptive retention rate (Polar pesticides, medical residues, bacteria, ...): | 25% |
| Flow rate (at 0,5 bar): | 28 l/min |
| Adsorptive retention rate (Lead, Copper): | 20% |
| Adsorptive retention capacity: | 31 m³ |
| Adsorptive retention rate (Chlorine): | 50% |
| Particle retention capacity: | 53 m³ |
| Max. useful life of the filter cartridge: | 3 months |
| Contains: | Activated carbon |
