Carbonit SANUNO Basic
Description
Carbonit SANUNO Basic countertop water filter
- The SANUNO Basic Set provides simple and high-class drinking water enjoyment.
- The well-proven SANUNO countertop filter is installed within seconds and eliminates cumbersome drilling.
- Compatible to almost every commercial water taps with M22 female thread. (Adaptor enclosed for M24 female thread.)
- Perfectly suitable for the office, rented- or vacation home, or anytime when it is not appropriate to connect a filter to the water piping under the counter. This allows flexibly switching between different water taps.
- The handy switch valve allows routing of the drinking water through the filter when needed. The existing water-tap can otherwise be used as usual.
Compatible filter cartridges
- The Carbonit SANUNO Basic is delivered without filter cartridge.
- Compatible to all 9 3/4" filter cartridges.
- For hygienic reasons, we recommend replacement of the cartridges every 6 months (according to DIN 1988).
- Do not miss any cartridge replacement, apply for our non-binding and free of charge filter subscription service.
Installation
- The Carbonit SANUNO Basic counter top filter can be attached easily and fast to any standard water taps.
- Connection to a sink tap via a special switch valve.
- The set contains an adapter (M24 male thread) to be used as needed (further connection adapters).
- The unit is meant to be located near the water tap, e.g on the sink.
- Only to be used with cold water and must be protected against freezing.
- Must not be installed with a low pressure water boiler.
Dimensions and other information on the Carbonit SANUNO Basic filter
Type of connection: | On the counter |
---|---|
H x B x T: | 300 x 155 x 120 mm |
Material: | PP |
Length of the filter cartridge: | 248 mm | 9 3/4" |
Suitable for low pressure boilers: | No |
Length of the connection hose: | approx. 900 mm |
Connection: | M22x1 union nut, M24x1 external thread |
Height of the outlet: | 180 mm |
Videos
Product videos
Scope of delivery
Scope of delivery
This Carbonit SANUNO Basic set contains the following parts
- one SANUNO filter housing (1/4" female thread)
- one SANUNO Tap adaptor assembly consisting of:
- one PVC-U hose (plasticizer-free, about 90 cm long) with
- one 90° elbow (1/4" male thread, premounted on the device) on one side
- and one special switch valve (M22 union nut) on the other side
- one tap
- one connection adapter M24 male thread x M22 male thread
Characteristics
Characteristics
Ratings (3)
Average product review
Total entries:
3
Total entries:
3